WLAN_1.3.6.1.4.1.2011.6.139.13.1.1.29 hwApNotSupportCountryCodeTrap

Description

WLAN/4/AP_UNSUPPORT_COUNTRY_CODE:OID [oid] AP not support configured country code notify.(APMAC=[MacAddress], APName=[STRING], COUNTRY CODE=[OCTET], APID=[INTEGER])

The AP does not support the country code configured on the AC.

Attribute

Alarm ID	Alarm Severity	Alarm Type
1.3.6.1.4.1.2011.6.139.13.1.1.29	Warning	equipmentAlarm(5)

Parameters

Name	Meaning
OID	Indicates the ID of the MIB object.
APMAC	Indicates the MAC address of an AP.
APName	Indicates the AP name.
COUNTRY CODE	Indicates the country code configured on the AP.
APID	Indicates the AP ID.

Impact on the System

The AP cannot get online.

Possible Causes

A country code not supported by the AP is configured on the AC.

Procedure

Run the display regulatory-domain-profile { all | name profile-name } command to check whether the country code configured on the AC is the same as that supported by the AP.
- If the country codes are the same, go to Step 3.
- If the country codes are different, go to Step 2.
Run the country-code country-code command to set the country code of the AC to the one supported by the AP.
- If the alarm persists, go to Step 4.
- If the alarm is cleared, go to Step 5.
Collect alarm messages, log messages, and configurations, and then contact the technical support personnel.
End.

Related Information

None.