WLAN_1.3.6.1.4.1.2011.6.139.13.1.1.54 hwApOpticalTxPowerTooHighRestoreTrap

Description

WLAN/6/AP_OPTICAL_TX_POWER_TOO_HIGH_RESTORE:OID [oid] The transmit power of the AP's optical module falls below the upper threshold. (APMAC=[MacAddress], APName=[STRING], ApIfIndex=[INTEGER], Ap Optical TxPower=[INTEGER](0.1uw), ApEntityPhysicalName=[OCTET], APID=[INTEGER])

The transmit power of the AP's optical module has fallen below the upper threshold.

Attribute

Alarm ID	Alarm Severity	Alarm Type
1.3.6.1.4.1.2011.6.139.13.1.1.54	Cleared	equipmentAlarm(5)

Parameters

Name	Meaning
OID	Indicates the ID of the MIB object.
APMAC	Indicates the MAC address of an AP.
APName	Indicates the AP name.
ApIfIndex	Indicates the index of the AP interface on which the optical module is installed. This alarm is not supported by the AP8030DN, AP9131DN, AP9132DN, or AP6510DN among APs supporting optical modules.
Ap Optical TxPower	Indicates the current transmit power of the AP's optical module.
ApEntityPhysicalName	Indicates the name of the AP interface on which the optical module is installed. This alarm is not supported by the AP8030DN, AP9131DN, AP9132DN, or AP6510DN among APs supporting optical modules.
APID	Indicates the AP ID.

Impact on the System

None.

Possible Causes

The transmit power of the AP's optical module recovered and fell below the upper threshold.

Procedure

This alarm message is informational only, and no action is required.

Related Information

WLAN_1.3.6.1.4.1.2011.6.139.13.1.1.53 hwApOpticalTxPowerTooHighTrap