WLAN/6/AP_OPTICAL_TX_POWER_TOO_LOW_RESTORE:OID [oid] The transfer power of the AP's optical module increases above the lower threshold. (APMAC=[MacAddress], APName=[STRING], ApIfIndex=[INTEGER], Ap Optical TxPower=[INTEGER](0.1uw), ApEntityPhysicalName=[OCTET], APID=[INTEGER])
The transmit power of the AP's optical module exceeded the lower threshold.
Alarm ID | Alarm Severity | Alarm Type |
---|---|---|
1.3.6.1.4.1.2011.6.139.13.1.1.56 |
Cleared |
equipmentAlarm(5) |
Name | Meaning |
---|---|
OID |
Indicates the ID of the MIB object. |
APMAC |
Indicates the MAC address of an AP. |
APName |
Indicates the AP name. |
ApIfIndex |
Indicates the index of the AP interface on which the optical module is installed. This alarm is not supported by the AP8030DN, AP9131DN, AP9132DN, or AP6510DN among APs supporting optical modules. |
Ap Optical TxPower |
Indicates the current transmit power of the AP's optical module. |
ApEntityPhysicalName |
Indicates the name of the AP interface on which the optical module is installed. This alarm is not supported by the AP8030DN, AP9131DN, AP9132DN, or AP6510DN among APs supporting optical modules. |
APID |
Indicates the AP ID. |