WLAN_1.3.6.1.4.1.2011.6.139.16.1.1.1.22 hwApRoamUserNumExceedThresholdTrap

Description

WLAN/4/ROAM_STA_NUM_EXCEED_THRESHOLD:OID [oid] AP roam user number exceed threshold notify. (APMAC=[OPAQUE], RadioID=[INTEGER], APName=[OCTET], UserNum=[INTEGER], APID=[INTEGER])

The AP generates the alarm when the number of roaming users exceeds the alarm threshold.

Attribute

Alarm ID	Alarm Severity	Alarm Type
1.3.6.1.4.1.2011.6.139.16.1.1.1.22	Warning	equipmentAlarm(5)

Parameters

Name	Meaning
OID	Indicates the ID of the MIB object.
APMAC	Indicates the MAC address of an AP.
RadioID	Indicates the radio ID of the AP.
APName	Indicates the AP name.
UserNum	Indicates the number of UAC users.
APID	Indicates the AP ID.

Impact on the System

New users cannot roam to the AP.

Possible Causes

The number of roaming users on the AP exceeds the alarm threshold.

Procedure

Run the uac client-number threshold threshold access access-threshold [ roam roam-threshold ] command in the radio profile view to increase the upper limit on the number of roaming users. Then, check whether the alarm persists.
- If so, go to Step 2.
- If not, go to Step 3.
Collect alarm messages, log messages, and configurations, and then contact the technical support personnel.
End.

Related Information

WLAN_1.3.6.1.4.1.2011.6.139.16.1.1.1.23 hwApRoamUserNumExceedThresholdRecovTrap