WLAN_1.3.6.1.4.1.2011.6.139.16.1.1.1.9 hwStaInterfDetectedTrap

Description

WLAN/4/STA_INTERFERENCE: OID [oid] Jam of station is detected notify.(APMAC=[OPAQUE], RadioID=[INTEGER], APName=[OCTET], APID=[INTEGER])

STA interference was detected.

Alarm ID	Alarm Severity	Alarm Type
1.3.6.1.4.1.2011.6.139.16.1.1.1.9	Warning	equipmentAlarm(5)

Name	Meaning
oid	Indicates the ID of the MIB object.
APMAC	Indicates the MAC address of an AP.
RadioID	Indicates the radio ID.
APName	Indicates the AP name.
APID	Indicates the AP ID.

If the number of interfering STAs exceeds the alarm threshold, the AP service performance is degraded.

The number of interfering STAs exceeded the alarm threshold.

Run the display radio-2g-profile { all | name profile-name } and display radio-5g-profile { all | name profile-name } commands to view the value of Station interference threshold and check whether the alarm threshold for STA interference is configured properly. It is recommended that you set the alarm threshold for STA interference to 32.
- If so, go to Step 3.
- If not, go to Step 2.
Run the interference station threshold command to set a proper alarm threshold for STA interference. Then, check whether the alarm persists.
- If so, go to Step 3.
- If not, go to Step 5.
Keep the AP away from the STAs that cause interference to decrease the STA interference to be lower than the alarm threshold. Then, check whether the alarm persists.
- If so, go to Step 4.
- If not, go to Step 5.
Collect alarm messages, log messages, and configurations, and then contact the technical support personnel.
End.

None.