< Home

WLAN_1.3.6.1.4.1.2011.6.139.18.1.1.1.5 hwWlanStaTamperAttackTrap

Description

WLAN/4/STA_TAMPER_ATTACK: OID [oid] Tamper attack notify.(APMAC=[OPAQUE],APMAC=[OPAQUE],RadioID=[INTEGER],StaMac=[OPAQUE],APName=[OCTET],StaAssocBssid=[OPAQUE],Ssid=[OCTET], APID=[INTEGER])

Attack messages were modified.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.6.139.18.1.1.1.5 Warning equipmentAlarm(5)

Parameters

Name Meaning

OID

Indicates the ID of the MIB object.

APMAC

Indicates the MAC address of an AP.

RadioID

Indicates the radio ID.

StaMac

Indicates the MAC address of a STA, which identifies the STA and functions as the index for querying information associated with the STA.

APName

Indicates the AP name.

StaAssocBssid

Indicates the BSSID associated with the STA.

Ssid

Indicates the SSID associated with the STA.

APID

Indicates the AP ID.

Impact on the System

STAs cannot go online.

Possible Causes

The AP received incorrect message authentication codes.

Procedure

  1. Check whether the MAC address of the STA is the same as that of the attack device.

    • If so, go to Step 2.
    • If not, go to Step 4.

  2. Run the sta-mac mac-address [ description description ] command to add the attack device's MAC address to the blacklist in the STA blacklist profile view.
  3. Check whether the alarm persists.

    • If so, go to Step 4.
    • If not, go to Step 5.

  4. Collect alarm messages, log messages, and configurations, and then contact the technical support personnel.
  5. End.

Related Information

None.

Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >