WLAN_1.3.6.1.4.1.2011.6.139.19.3.1.3 hwWlanAeroscoutLocationViaAcTrap

Description

WLAN/4/AE_VIA_AC_ABNORMAL: OID [oid] An exception occurred in the AeroScout location function (via AC). (Reason=[OCTET])

The AeroScout location function did not take effect when location packets are reported through the AC.

Alarm ID	Alarm Severity	Alarm Type
1.3.6.1.4.1.2011.6.139.19.3.1.3	Warning	equipmentAlarm(5)

Name	Meaning
OID	Indicates the ID of the MIB object.
Reason	Indicates the alarm reason.

The AeroScout location function does not take effect when location packets are reported through the AC.

The AeroScout location function was configured, in which location packets are reported through the AC. Then the AC was upgraded.

Search for the AeroScout location profile that is configured to report location packets through the AC.
Check whether the AeroScout location function using location packets reported through the AC needs to be retained.
- If so, go to Step 3.
- If not, go to Step 4.
Run the aeroscout local ip-address ip-address command in the WLAN view to configure the local IP address used by the AC to receive packets from the location server. Check whether the alarm persists.
- If the alarm persists, go to Step 5.
- If the alarm is cleared, go to Step 6.
Delete the AeroScout location configuration in which location packets are reported through the AC, and check whether the alarm persists.
- If the alarm persists, go to Step 5.
- If the alarm is cleared, go to Step 6.
Collect trap, log, and configuration information, and contact technical support.
End.

None