WLAN/4/AC_AUTHENTICATE_FAIL

Message

WLAN/4/AC_AUTHENTICATE_FAIL: Failed to authenticate services with the peer device (local address=[STRING], peer address=[STRING], service=[STRING])

The local device failed to authenticate services with the peer device.

Parameter Name	Parameter Meaning
local address	Indicates the IP address of the local device.
peer address	Indicates the IP address of the peer device.
service	Indicates the type of the service to be authenticated.

Cause 1:

The service type is Roam, and no peer member is configured for the mobility group.

Cause 2:

The service type is Election, and the number of STAs connected to the elected Leader AP has reached the maximum.

Check whether the corresponding configuration is correct based on the service type.
- If the alarm is cleared, go to 4.
- If not, go to 2
Correct the configuration and then check whether the service is recovered.
- If the alarm is cleared, go to 3.
- If not, go to 4
Run the display wlan wlkm link-info command in the diagnostic view to check whether the service link is successfully established.
- If the alarm is cleared, go to 5.
- If not, go to 4
Collect alarms, logs, and configurations, and contact technical support personnel.
End.