ac protect enable

Function

The ac protect enable command enables dual-link backup globally and disables N+1 backup.

The undo ac protect enable command disables dual-link backup globally and enables N+1 backup.

By default, dual-link backup is disabled globally, and N+1 backup is enabled.

Format

ac protect enable

undo ac protect enable

Parameters

None

Views

WLAN view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

To ensure service stability, an AP needs to establish connections with two ACs. The two ACs work in active/standby mode. The active AC provides services for APs, whereas the standby AC is a backup to the active AC.

Follow-up Procedure

After dual-link backup or N+1 backup is enabled globally, configure the AC priority and standby AC IP address to implement dual-link backup or N+1 backup.

Precautions

Ensure that active and standby ACs deliver the same WLAN service configuration to an AP that connects to the two ACs.

Example

# Enable dual-link backup globally and disable N+1 backup.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] ac protect enable
Warning: This operation maybe cause AP reset, continue?[Y/N]:y