access-user syslog-restrain period

Function

The access-user syslog-restrain period command sets a period for system log suppression.

The undo access-user syslog-restrain period command restores the default period for system log suppression.

By default, the period of system log suppression is 300s.

Format

access-user syslog-restrain period period

undo access-user syslog-restrain period

Parameters

Parameter	Description	Value
period	Specifies the period for system log suppression.	The value is an integer that ranges from 60 to 604800, in seconds.

Views

System view

Default Level

2: Configuration level

Usage Guidelines

After the system log suppression function is enabled using the access-user syslog-restrain enable command, use this command to set the system log suppression period. After generating a system log, the device will not generate the same log within the suppression period.

Example

# Set the period for system log suppression to 600s.

<HUAWEI> system-view
[HUAWEI] access-user syslog-restrain period 600