accounting-scheme (AAA view)

Function

The accounting-scheme command creates an accounting scheme and displays the accounting scheme view.

The undo accounting-scheme command deletes an accounting scheme.

By default, there is an accounting scheme named default in the system. This default accounting scheme can be modified but cannot be deleted. In this default accounting scheme, non-accounting is used and the real-time accounting function is disabled.

Format

accounting-scheme accounting-scheme-name

undo accounting-scheme accounting-scheme-name

Parameters

Parameter	Description	Value
accounting-scheme-name	Specifies the name of an accounting scheme.	The value is a string of 1 to 32 case-sensitive characters. It cannot contain spaces or the following symbols: / \ : * ? " < > \| @ ' %. The value cannot be - or --.

Views

AAA view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

To charge users in a domain, create and configure an accounting scheme, for example, the accounting mode and policy for accounting-start failures. Run the accounting-scheme command in the AAA domain view to apply the accounting scheme to the domain.

Follow-up Procedure

After an accounting scheme is created:

Run the accounting interim-fail command to set the maximum number of real-time accounting failures and configure a policy used after a real-time accounting failure.
Run the accounting realtime command to enable the real-time accounting function and set the interval for real-time accounting in an accounting scheme.
Run the accounting start-fail command to configure a policy for accounting-start failures.
Run the accounting-mode command to configure an accounting mode in an accounting scheme.

After an accounting scheme is configured, run the accounting-scheme command in the AAA domain view to apply the accounting scheme to a domain.

Precautions

If the configured accounting scheme does not exist, the accounting-scheme command in the AAA view creates an accounting scheme and displays the accounting scheme view. If the configured accounting scheme already exists, the accounting-scheme command in the AAA view displays the accounting scheme view directly.

To delete an accounting scheme applied to a domain, run the undo accounting-scheme (AAA domain view) command.

Example

# Create an accounting scheme named scheme1.

<HUAWEI> system-view
[HUAWEI] aaa
[HUAWEI-aaa] accounting-scheme scheme1
[HUAWEI-aaa-accounting-scheme1]

# Enter the default accounting scheme view.

<HUAWEI> system-view
[HUAWEI] aaa
[HUAWEI-aaa] accounting-scheme default
[HUAWEI-aaa-accounting-default]