accounting dual-stack separate

Function

The accounting dual-stack separate command enables the function of collecting statistics on IPv4 and IPv6 traffic separately.

The undo accounting dual-stack separate command disables the function of collecting statistics on IPv4 and IPv6 traffic separately.

By default, statistics on IPv4 and IPv6 traffic are collected together.

Only the S5720-EI, S6720-EI, S6720S-EI, S5720-HI, S5730-HI, S6720-HI, S5731-H, S5731S-H, S5731-S, S5731S-S, S5732-H,?S6730-H, S6730-S,? S6730S-H and S6730S-S support this command.

Format

accounting dual-stack separate

undo accounting dual-stack separate

Parameters

None

Views

AAA domain view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

To collect statistics on IPv4 and IPv6 traffic separately or perform accounting for IPv4 and IPv6 users respectively, you need to run the statistic enable command to enable the traffic statistics collection function, and then run the accounting dual-stack separate command to enable the function of collecting statistics on IPv4 and IPv6 traffic respectively.

Precautions

You are advised to configure this function before users go online. If this function is configured after users go online, the statistics on IPv4 and IPv6 traffic are inaccurate. In this case, you are advised to re-collect traffic statistics after users go offline.

Example

# Enable the function of collecting statistics on IPv4 and IPv6 traffic separately.

<HUAWEI> system-view
[HUAWEI] aaa
[HUAWEI-aaa] domain huawei
[HUAWEI-aaa-domain-huawei] accounting dual-stack separate
Warning: This operation may cause online users' traffic statistics inaccurate, Re-online is recommended after this operation, continue?[Y/N]y