aeroscout local

Function

The aeroscout local command configures a local IP address used by the AC to receive packets from a location server.

The undo aeroscout local command deletes the configured local IP address used by the AC to receive packets from a location server.

By default, no local IP address is configured for the AC to receive packets from a location server.

Format

aeroscout local ip-address ip-address

undo aeroscout local

Parameters

Parameter	Description	Value
ip-address ip-address	Specifies a local IPv4 address used by the AC to receive packets from a location server.	The value is in dotted decimal notation.

Parameter

Description

Value

ip-address ip-address

Specifies a local IPv4 address used by the AC to receive packets from a location server.

The value is in dotted decimal notation.

Views

WLAN view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

After the aeroscout server port port-num via-ac ac-port ac-port-num command is executed to configure location data to be reported through the AC, run the aeroscout local ip-address ip-address command to configure a local IP address used by the AC to receive packets from a location server. The AC can receive packets from the location server only using this IP address.

Precautions

You need to run the source ip-address ip-address command to configure the source IP address used by the AC to send packets to the location server.

Example

# Configure 10.1.1.1 as the local IP address used by the AC to receive packets from a location server.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] aeroscout local ip-address 10.1.1.1