agile-antenna-polarization

Function

The agile-antenna-polarization enable command enables self-adaptive polarization for agile antennas.

The undo agile-antenna-polarization enable command disables self-adaptive polarization for agile antennas.

By default, self-adaptive polarization is disabled for agile antennas.

Format

agile-antenna-polarization enable

undo agile-antenna-polarization enable

Parameters

None

Views

2G radio profile view, 5G radio profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

Self-adaptive polarization for agile antennas can reduce interference between transmit signals of antennas, and increase the transmit power of antennas and the demodulation SNR of STAs. When an AP8130DN or AP8130DN-W is deployed to provide wireless coverage, you can enable this function when the following types of STA exist:

STA with one transmit antenna and one receive antenna in 1x1 mode
STA with two transmit antennas and two receive antennas in 2x2 mode

After this function is enabled, the AP uses two mutually orthogonal antennas to communicate with STAs but not a third antenna.

Prerequisites

Dual-polarized antennas have been connected to radio ports A and B on the same frequency band.

Example

# Enable self-adaptive polarization for agile antennas in a 2G radio profile.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] radio-2g-profile name default
[HUAWEI-wlan-radio-2g-prof-default] agile-antenna-polarization enable