air-scan-profile

Function

The air-scan-profile command creates an air scan profile and displays the air scan profile view.

The undo air-scan-profile command deletes an air scan profile.

By default, the system provides the air scan profile default. You can run the display air-scan-profile command to view configuration of the air scan profile default.

Format

air-scan-profile name profile-name

undo air-scan-profile { name profile-name | all }

Parameters

Parameter	Description	Value
name profile-name	Specifies the name of an air scan profile.	The value is a string of 1 to 35 case-insensitive characters. It does not contain question marks (?) or spaces, and cannot start or end with double quotation marks (" ").
all	Deletes all air scan profiles.	The air scan profile default can be modified but cannot be deleted.

Views

WLAN view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

After an air scan profile is created using the air-scan-profile command and bound to a radio profile, and scanning functions are enabled, such as radio calibration, smart roaming, spectrum analysis, WLAN location, and WIDS, the AP periodically scans surrounding radio signals and reports the collected information to an AC or a server. The information is used for radio calibration, smart roaming spectrum analysis, WLAN location, or WIDS data analysis.

Follow-up Procedure

Run the air-scan-profile (radio profile view) command to bind the air scan profile to a 2G radio profile or 5G radio profile so that the air scan profile can take effect.

Example

# Create the air scan profile air-scan01.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] air-scan-profile name air-scan01
[HUAWEI-wlan-air-scan-prof-air-scan01]