The ap-mode command sets the working mode of an AP.
The undo ap-mode command disables the AC from delivering this parameter setting to APs after the configuration is delivered using the commit command.
By default, an AP works in Fit mode.
Parameter | Description | Value |
---|---|---|
fat |
Specifies the Fat mode. |
- |
cloud |
Specifies the cloud mode. |
- |
Usage Scenario
The working mode of an AP is configured on the AC and delivers to the AP. After a restart, the AP will switch the working mode accordingly.
Prerequisites
Follow-up Procedure
Run the commit command to commit the configuration.
Configuration Impact
After the working mode of the AP is switched to Fat or cloud, the AP will be out of control by the AC.
This command is available only for the AP2051DN, AP2051DN-S, AP2051DN-E, AP5050DN-S, AP1050DN-S, AP2050DN, AP2051DN-L-S, AP4050DE-B-S, AP3050DE, AP4050DE-M-S, AP4050DE-M, AP7060DN, AP5510-W-GP, AirEngine 5760-10AP2050DN-E, AP2050DN-S, AP4050DN-E, AP4050DN-HD, AP4050DN, AP4051DN, AP4151DN, AP4050DN-S, AP4051DN-S, AP8050DN, AP8150DN, AP8050DN-S, AP4051TN, AP6052DN, AP7052DN, AP7152DN, AP7052DE, AP8050TN-HD, AP8082DN, AP8182DN, AP6050DN, AP6150DN, AP7050DE, AP7050DN-E, AP8030DN, AP8130DN, AD9430DN-12, AD9430DN-24, and AD9431DN-24XAirEngine 8760-X1-PRO, AirEngine 6760-X1, AirEngine 6760-X1E, AirEngine 5760-51, AirEngine 5760-22W, AirEngine 8760R-X1, AirEngine 8760R-X1E, AirEngine 6760R-51, AirEngine 6760R-51E, and AirEngine 9700D-M. The AP4030TN can be switched only to the Fat mode.
# Set the working mode of an AP to Fat.
<HUAWEI> system-view [HUAWEI] wlan [HUAWEI-wlan-view] provision-ap [HUAWEI-wlan-provision-ap] ap-mode fat Warning: When the configuration is committed, the AP mode will be switched if supported and the AP will be out of control by the AC.Continue?[Y/N]: y