ap log module

Function

The ap log module command enables APs to report logs of the module with a specified ID to a WMI server.

The undo ap log module mid mid command disables APs from reporting logs of the module with a specified ID to a WMI server.

The undo ap log module all command disables APs from reporting logs of all modules to a WMI server.

By default, APs do not report logs of any module to a WMI server.

Format

ap log module mid mid [ name name ]

undo ap log module { mid mid | all }

Parameters

Parameter	Description	Value
mid mid	Specifies a module ID.	The value is in hexadecimal notation. Set the value to the ID of a module registered with the information center. NOTE: You can enter mid ? to obtain the predefined ID of a module and the module name. You can run the display info-center statistics command on an AP to query more module IDs.
name name	Specifies a module name. The value must correspond to the value of mid.	The value is a string of 1 to 24 characters.

Views

WMI profile view

Default Level

2: Configuration level

Usage Guidelines

If APs need to report logs to a WMI server, specify the ID of a module whose logs are to be reported and enable the log report function. Otherwise, the APs do not report logs of this module.

To enable APs to report logs of multiple modules, run this command repeatedly to specify multiple module IDs.

Example

# Enable APs to report logs of the module C1480000 to a WMI server.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] wmi-server name abc
[HUAWEI-wlan-wmi-server-prof-abc] ap log module mid c1480000