ap update load

Function

The ap update load command upgrades a specified AP.

The undo ap update load command cancels AP upgrade.

Format

ap update load { ap-name ap-name | ap-mac ap-mac | ap-id ap-id } update-filename update-file-name

undo ap update load { ap-name ap-name | ap-mac ap-mac | ap-id ap-id }

Parameters

Parameter	Description	Value
ap-name ap-name	Specifies the name of the AP to be upgraded.	The AP name must already exist.
ap-mac ap-mac	Specifies the MAC address of the AP to be upgraded.	The AP's MAC address must already exist.
ap-id ap-id	Specifies the ID of the AP to be upgraded.	The AP ID must already exist.
update-filename update-file-name	Specifies the AP upgrade file.	The upgrade file name must already exist.

Views

WLAN view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

When APs are upgraded in batches based on AP types, if the new version fails, the version rollback takes a long period. Therefore, you can upgrade a single AP to check whether faults occur on the version, ensuring successful upgrades in batches.

Prerequisites

When the AC mode is used, the AP upgrade file has been uploaded to the AC. If the FTP or SFTP mode is used, the AP upgrade file has been uploaded to the FTP server or SFTP server.

The AP is in normal or vmiss state.

Follow-up Procedure

Run the ap update reset { ap-name ap-name | ap-mac ap-mac | ap-id ap-id } command to restart the AP to make the upgrade take effect.

Precautions

The undo ap update load { ap-name ap-name | ap-mac ap-mac | ap-id ap-id } command cancels AP upgrade. However, if the AP system software has been written to the flash memory during the upgrade, the command does not take effect. You can run the display ap update status { ap-name ap-name | ap-id ap-id } command to check AP upgrade progress.

Example

# Upgrade the AP N1-2 using the upgrade file AirEngineX760-V200R019C10.cc.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] ap update load ap-name N1-2 update-filename AirEngineX760-V200R019C10.cc
Info: The current upgrade mode is AC mode, which may affect performance and take a long time. The FTP or SFTP upgrade mode is recommended. Continue? [Y/N]:y