ap update reset

Function

The ap update reset command restarts a specified AP after it is upgraded.

Format

ap update reset { ap-name ap-name | ap-mac ap-mac | ap-id ap-id }

Parameters

Parameter	Description	Value
ap-name ap-name	Specifies the name of the AP to be restarted.	The AP name must already exist.
ap-mac ap-mac	Specifies the MAC address of the AP to be restarted.	The AP's MAC address must already exist.
ap-id ap-id	Specifies the ID of the AP to be restarted.	The AP ID must already exist.

Views

WLAN view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

After an AP has been upgraded, run the ap update reset command to restart it to make the AP upgrade take effect.

Prerequisites

The AP is in normal or vmiss state.

The ap update load { ap-name ap-name | ap-mac ap-mac | ap-id ap-id } update-filename update-file-name command has been executed to upgrade a specified AP, and the display ap update status command has been executed to verify that Update Status of the specified AP is succeed(need reset).

Example

# Restart AP N1-2 after the upgrade.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] ap update load ap-name N1-2 update-filename AirEngineX760-V200R019C10.cc
[HUAWEI-wlan-view] ap update reset ap-name N1-2