application-apperceive default drop (upgrade-compatible command)

Function

The application-apperceive default drop command enables the device to discard the received packets when no matching application layer association policy exists.

The undo application-apperceive default drop command enables the device to deliver the received packets to the upper layer though no matching application layer association policy exists.

By default, the device is enabled to deliver the received packets to the upper layer though no matching application layer association policy exists.

Format

application-apperceive default drop

undo application-apperceive default drop

Parameters

None

Views

System view

Default Level

2: Configuration level

Usage Guidelines

After the application-apperceive default drop command is run, if a protocol is not enabled in the system view nor in the interface view, the device discards all the packets of this protocol type.

Example

# Enable the device to discard the received packets when no matching application layer association policy exists.

<HUAWEI> system-view
[HUAWEI] application-apperceive default drop