as authentication configuration revert disable

Function

The as authentication configuration revert disable command enables the function of retaining the authentication configuration after an AS goes offline.

The undo as authentication configuration revert disable command disables the function of retaining the authentication configuration after an AS goes offline.

By default, the authentication configuration is cleared after an AS goes offline.

This command can only be executed on a parent switch.

Format

as authentication configuration revert disable

undo as authentication configuration revert disable

Parameters

None

Views

uni-mng view

Default Level

3: Management level

Usage Guidelines

When an AS goes offline, it automatically clears its authentication configuration to ensure connectivity in the local area network (LAN) connected to it in case of an AS authentication failure. However, clearing the authentication configuration when the AS goes offline will lengthen the time taken for the AS to go online again. If the AS is not connected to a LAN or if the time taken for the AS to go online again needs to be shortened, enable the function of retaining the authentication configuration after the AS goes offline on the parent to shorten the time taken for the AS to go online again.

Example

# Enable the function of retaining the authentication configuration after an AS goes offline.

<HUAWEI> system-view
[HUAWEI] uni-mng
[HUAWEI-um] as authentication configuration revert disable