auth-mode none

Function

The auth-mode none command sets the AS authentication mode to no authentication.

The undo auth-mode command restores the default AS authentication mode.

By default, authentication is required when an AS connects to an SVF system.

This command can only be executed on a parent switch.

Format

auth-mode none

undo auth-mode

Parameters

None

Views

AS authentication view

Default Level

3: Management level

Usage Guidelines

By default, an AS needs to be authenticated using a blacklist or whitelist before connecting to an SVF system. You can also configure no authentication for ASs. In no authentication mode, an AS can connect to an SVF system regardless of whether it is in a blacklist or whitelist.

Non-authentication has security risks. Therefore, authentication is recommended.

Example

# Configure no authentication for ASs to connect to an SVF system.

<HUAWEI> system-view
[HUAWEI] as-auth
[HUAWEI-as-auth] auth-mode none