authentication ip-address in-accounting-start

Function

The authentication ip-address in-accounting-start command enables the function of carrying users' IP addresses in Accounting-Start packets.

The undo authentication ip-address in-accounting-start command disables the function of carrying users' IP addresses in Accounting-Start packets.

By default, the function of carrying users' IP addresses in Accounting-Start packets is disabled.

Format

authentication ip-address in-accounting-start

undo authentication ip-address in-accounting-start

Parameters

None

Views

Authentication profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

The device reports access information and basic network information (IP address) of users through Accounting-Start packets. Therefore, the device needs to support carrying users' IP addresses in Accounting-Start packets.

Precautions

If the device cannot learn IP addresses of users, the device does not send Accounting-Start packets.

This command takes effect only for 802.1X authentication and MAC address authentication users. By default, Accounting-Start packets for Portal authentication carry users' IP addresses.

This command takes effect on both IPv4 and IPv6 users.

Example

# Enable the function of carrying users' IP addresses in Accounting-Start packets.

<HUAWEI> system-view
[HUAWEI] authentication-profile name test 
[HUAWEI-authen-profile-test] authentication ip-address in-accounting-start