The authentication mac-move quiet-user-alarm percentage command configures the upper and lower alarm thresholds for the percentage of MAC address migration users in quiet state.
The undo authentication mac-move quiet-user-alarm percentage command restores the default setting.
By default, the lower alarm threshold is 50 and upper alarm threshold is 100.
authentication mac-move quiet-user-alarm percentage lower-threshold upper-threshold
undo authentication mac-move quiet-user-alarm percentage
Parameter |
Description |
Value |
|---|---|---|
| lower-threshold | Specifies the lower alarm threshold. |
The value is an integer that ranges from 1 to 100. |
| upper-threshold | Specifies the upper alarm threshold. |
The value is an integer that ranges from 1 to 100. The value must be greater than that of lower-threshold. |
The authentication mac-move quiet-user-alarm enable command can be run to enable the device to send alarms about MAC address migration quiet to improve maintainability of the MAC address migration quiet function. The device sends alarms when the percentage of the actual user amount in the MAC address migration quiet table against the maximum number of users exceeds the upper alarm threshold configured. If the percentage decreases to be equal to or smaller than the lower alarm threshold, the device sends a clear alarm. The upper and lower alarm thresholds are configured using the authentication mac-move quiet-user-alarm percentage command.