authentication single-stack-control enable

Function

The authentication single-stack-control enable command enables the single-stack authentication function.

The undo authentication single-stack-control enable command disables the single-stack authentication function.

By default, the single-stack authentication function is disabled.

Only the S5720-HI, S5731-H, S5731S-H, S5731-S, S5731S-S, S5732-H, S6730-H, S6730S-H, S6730-S, S6730S-S, S5730-HI, and S6720-HI support this command.

Format

authentication single-stack-control { ipv4 | ipv6 } enable

undo authentication single-stack-control enable

Parameters

Parameter	Description	Value
ipv4	Enables the single-stack authentication function for IPv4 traffic.	-
ipv6	Enables the single-stack authentication function for IPv6 traffic.	-

Views

Authentication profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

By default, access control is not performed for IPv4 or IPv6 traffic. You can use this command to configure single-stack authentication to control IPv4 or IPv6 traffic separately.

Precautions

This function takes effect only on wired Portal users.

Example

# Enable single-stack authentication for IPv6 traffic in the authentication profile p1.

<HUAWEI> system-view
[HUAWEI] authentication-profile name p1
[HUAWEI-authen-profile-p1] authentication single-stack-control ipv6 enable