auto-defend alarm enable

Function

The auto-defend alarm enable command enables the event reporting function for attack source tracing.

The undo auto-defend alarm enable command disables the event reporting function for attack source tracing.

By default, the event reporting function for attack source tracing is disabled.

Format

auto-defend alarm enable

undo auto-defend alarm enable

Parameters

None

Views

Attack defense policy view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

When the number of packets of a specified protocol from an attack source exceeds the threshold in a specified period, the device reports an event to the administrator so that the administrator can take measures to protect the device.

Prerequisites

Attack source tracing has been enabled using the auto-defend enable command.

Follow-up Procedure

Run the auto-defend threshold command to set the event reporting threshold for attack source tracing.

Example

# Enable the event reporting function in the attack defense policy test.

<HUAWEI> system-view
[HUAWEI] cpu-defend policy test
[HUAWEI-cpu-defend-policy-test] auto-defend enable
[HUAWEI-cpu-defend-policy-test] auto-defend alarm enable