The auto-frr command enables BGP Auto FRR.
The undo auto-frr command disables BGP Auto FRR.
By default, BGP Auto FRR is disabled.
auto-frr
undo auto-frr
None
BGP-VPN instance IPv4 address family view, BGP-VPN instance IPv6 address family view
2: Configuration level
Usage Scenario
This function is applicable to networks that require a low packet loss ratio and a short delay.
Using BGP Auto FRR together with BFD is recommended. They can rapidly detect a link fault and switch traffic to a standby link if a fault occurs.
# Enable BGP Auto FRR for unicast routes.
<HUAWEI> system-view [HUAWEI] bgp 100 [HUAWEI-bgp] ipv4-family vpn-instance vpna [HUAWEI-bgp-vpna] auto-frr