auto-off service

Function

The auto-off service command enables the scheduled VAP auto-off function and sets the time range within which the VAP is disabled.

The undo auto-off service command disables the scheduled VAP auto-off function.

By default, the scheduled VAP auto-off function is disabled.

Format

auto-off service start-time start-time end-time end-time

undo auto-off service

Parameters

Parameter	Description	Value
start-time start-time	Specifies the time when a VAP starts to be disabled.	The time is in hh:mm:ss format. hh indicates the hour that is an integer ranging from 0 to 23. mm indicates the minute that is an integer ranging from 0 to 59. ss indicates the second that is an integer ranging from 0 to 59.
end-time end-time	Specifies the time when a VAP stops being disabled.	The time is in hh:mm:ss format. hh indicates the hour that is an integer ranging from 0 to 23. mm indicates the minute that is an integer ranging from 0 to 59. ss indicates the second that is an integer ranging from 0 to 59.

Views

VAP profile view, 2G radio profile view, 5G radio profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

When an enterprise does not want employees to access the internal WLAN from 01:00 to 05:00, the administrator can run the auto-off service command to enable the scheduled VAP auto-off function.

Precautions

After the service mode of a VAP is enabled using the undo service-mode disable command, you can run the auto-off service command to configure the scheduled VAP auto-off function. In the scheduled time, the VAP is disabled and cannot be enabled using the undo service-mode disable command. To enable the VAP, run the undo auto-off service command.
The scheduled VAP auto-off function takes effect in the scheduled time only after the undo service-mode disable command is executed. If the service mode of a VAP is disabled using the service-mode disable command, the VAP auto-off function does not take effect.
The scheduled VAP auto-off function enabled in a VAP profile view takes effect only on the APs using the VAP profile, and the scheduled VAP auto-off function enabled in a radio profile view takes effect only on the APs using the radio profile.

Example

# Configure the scheduled VAP auto-off function in the VAP profile vap1, and configure the VAP to be disabled from 1:00:00 to 7:00:00.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] vap-profile name vap1
[HUAWEI-wlan-vap-prof-vap1] auto-off service start-time 1:00:00 end-time 7:00:00