band-width share-mode

Function

The band-width share-mode command enable the bandwidth share mode.

The undo band-width share-mode command restores the default configuration.

By default, the bandwidth share mode is disabled.

This command is only supported by the S5730-HI, S5731-H, S5731S-H, S5731-S, S5731S-S, S5732-H, S6730-H, S6730S-H, S6730-S, S6730S-S, S6720-HI, and S5720-HI.

Format

band-width share-mode

undo band-width share-mode

Parameters

None

Views

System view, AAA domain view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

On a home network, all family members go online using the same account. To improve service experience of family members, you can enable the bandwidth share mode so that all members can share the bandwidth.

Precautions

This function is not supported in the direct forwarding mode of wireless traffic.
If this command is run in the system view, it takes effect for all new online users who connected to the device. If this command is run in the AAA domain view, it takes effect only for new online users in the domain.
If the local or remote RADIUS server does not assign CAR settings to the users who will go online and the online users, the share mode is invalid to the users.
If the bandwidth share mode is enabled and different users use the same account for authentication, the users going online with no CAR settings assigned will not be affected when CAR settings are assigned to the users who go online later.

Example

# Enable the bandwidth share mode in the system view.

<HUAWEI> system-view
[HUAWEI] band-width share-mode

# Enable the bandwidth share mode in the AAA domain view.

<HUAWEI> system-view
[HUAWEI] aaa
[HUAWEI-aaa] domain huawei
[HUAWEI-aaa-domain-huawei] band-width share-mode