bandwidth (LSP attribute view)

Function

The bandwidth command configures the bandwidth in the CR-LSP attribute template.

The undo bandwidth command deletes the bandwidth in the CR-LSP attribute template.

By default, no bandwidth in the CR-LSP attribute template is configured.

bandwidth { ct0 ct0-bandwidth | ct1 ct1-bandwidth }

undo bandwidth { all | ct0 | ct1 }

Parameter	Description	Value
ct0 ct0-bandwidth	Specifies the bandwidth of an LSP of CT0.	The value is an integer that ranges from 1 to 4000000000, in kbit/s. By default, the bandwidth is 0 kbit/s.
ct1 ct1-bandwidth	Specifies the bandwidth of an LSP of CT1.	The value is an integer that ranges from 1 to 4000000000, in kbit/s. By default, the bandwidth is 0 kbit/s.
all	Deletes the bandwidth configured for the LSP of each CT.	-

LSP attribute view

2: Configuration level

The undo bandwidth command can be used to delete the bandwidth of all CTs or a specified CT:

undo bandwidth all: deletes all configured bandwidth.
undo bandwidth { ct0 | ct1 }: deletes the bandwidth of the specified CT configured on the current TE tunnel.

# Configure the bandwidth of an LSP of CT0 as 20 kbit/s in the CR-LSP attribute template.

<HUAWEI> system-view
[HUAWEI] lsp-attribute lsp-attribute-name
[HUAWEI-lsp-attribute-lsp-attribute-name] bandwidth ct0 20