bfd all-interfaces enable(RIP)
Function
The bfd all-interfaces enable command enables BFD on all the interfaces in a RIP process.
The undo bfd all-interfaces enable command disables BFD on all the interfaces in a RIP process.
By default, BFD is disabled in a RIP process.
Product |
Support |
|---|---|
S5720-EI, S5720-HI, S5720I-SI, S5720S-SI, S5720-SI, S5735-S, S5735S-S, S5735-S-I, S5730-HI, S5730S-EI, S5730-SI, S5731-H, S5731-S, S5731S-H, S5731S-S, S5732-H, S6720-EI, S6720-HI, S6720S-EI, S6720S-SI, S6720-SI, S6730-H, S6730S-H, S6730-S, and S6730S-S |
Supported |
S2720-EI, S5720-LI, S5735-L, S5735S-L, S5735S-L-M, S5720S-LI, S6720-LI, and S6720S-LI |
Not supported |
Usage Guidelines
If BFD parameters are configured, but the bfd all-interfaces enable command is not configured, BFD sessions cannot be established.
The BFD priority on an interface is higher than the BFD priority on a RIP process.
If the rip bfd block command is configured on an interface, the bfd all-interfaces enable command cannot be used to enable BFD on the interface.