bpdu dmac
Function
The bpdu dmac command configures actions taken on packets with a specified destination MAC address and protocol number.
The undo bpdu dmac command restores the default configurations.
By default, no action is taken on packets with a specified destination MAC address and protocol number.
S5720-HI, S5730-HI, S5731-H, S5731-S, S5731S-H, S5731S-S, S5732-H, S6720-HI, S6730-H, S6730S-H, S6730-S, and S6730S-S do not support this command.
Format
bpdu dmac mac-address eth-type type action encapsulate
undo bpdu dmac mac-address eth-type type action [ encapsulate ]
Parameters
Parameter |
Description |
Value |
|---|---|---|
dmac mac-address |
Specifies a destination MAC address. |
The value is in H-H-H format. An H contains four hexadecimal digits. The value cannot be 0000-0000-0000. |
| eth-type type | Specifies the protocol type of Ethernet packets. |
The value is a hexadecimal integer that ranges from 0 to FFFF. |
| action | Specifies the action taken on received packets. |
- |
| encapsulate | Encapsulates packets. |
- |