calibrate auto-txpower-select disable (upgrade-compatible command)

Function

The calibrate auto-txpower-select disable command disables automatic transmit power selection.

The undo calibrate auto-txpower-select disable command enables automatic transmit power selection.

By default, automatic transmit power selection is enabled.

calibrate auto-txpower-select disable

undo calibrate auto-txpower-select disable

None

RRM profile view

2: Configuration level

Two power selection modes are available:

Automatic mode (enabling automatic transmit power selection): An AP automatically selects or adjusts the transmit power based on the WLAN radio environment, removing the need to specify AP power manually.
Fixed mode (disabling automatic transmit power selection): The transmit power must be manually specified.

If an AP needs radio calibration, automatic transmit power selection must be enabled.