calibrate flexible-radio disable

Function

The calibrate flexible-radio disable command disables DFA of specified radios.

The undo calibrate flexible-radio disable command enables DFA of specified radios.

By default, DFA is enabled.

Format

calibrate flexible-radio disable

undo calibrate flexible-radio disable

Parameters

None

Views

AP radio view, AP group radio view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

After global DFA is enabled, you can run this command to disable DFA of a single AP radio or radios of an AP group in some areas.

Prerequisites

Global DFA has been enabled using the calibrate flexible-radio { auto-switch | auto-off } command.

Example

# Disable DFA of radio 0 of AP 1.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] calibrate enable auto
[HUAWEI-wlan-view] calibrate flexible-radio auto-switch
[HUAWEI-wlan-view] ap-id 1
[HUAWEI-wlan-ap-1] radio 0
[HUAWEI-wlan-radio-1/0] calibrate flexible-radio disable