The calibrate policy command creates a radio calibration policy.
The undo calibrate policy command deletes a radio calibration policy.
By default, no radio calibration policy is created.
Usage Scenario
Noise floor policy: When the noise floor of APs is high due to special external interference, service experience may deteriorate. With this radio calibration policy, the device takes actions to avoid interference. When detecting that the noise floor of the current channel exceeds the threshold for three consecutive times, an AP notifies the AC of the high noise floor. The AC then allocates another channel to the AP and does not allocate the current channel to the AP in 30 minutes.Prerequisites
The noise floor threshold for triggering radio calibration has been specified using the calibrate noise-floor-threshold threshold command.