Using the cfm md command, you can create an MD and enter the MD view. If the MD exists, you can use this command to enter the MD view.
| Parameter | Description | Value |
|---|---|---|
| md md-name | Specifies the name of an MD. | The value is a string of 1 to 43 characters, which
are case sensitive. The characters, such as ?, -, and space are excluded.
The name of an MD is used to identify the MD. Different MDs on a device
cannot have the same name. NOTE:
When double quotation marks are used around the string, spaces are allowed in the string. |
| dnsname-and-mdname | Indicates the MD name in the format that a DNS name is followed by an MD name. | - |
| mac-address | Indicates the MD name in the format that a MAC address is followed by an MD name. | - |
| md-name | Indicates that the MA ID field of the sent packet contains the MD name. | - |
| level level | Specifies the level of the MD. | The value is an integer ranging from 0 to 7. The greater the value, the higher the priority. The default value is 0. |
This command is available to aid upgrade compatibility. It can only be run during the configuration restoration phase of the upgrade.
It is replaced by the cfm md md-name [ format { no-md-name | dns dns-md-format-name | mac-address mac-md-format-name | string string-md-format-name } ] [ level level ] command.