channel-switch mode

Function

The channel-switch mode command configures an announcement mode for channel switching.

The undo channel-switch mode command restores the default announcement mode for channel switching.

By default, data transmission from STAs continues on the current channel when the channel is switched.

Format

channel-switch mode { stop-transmitting | continue-transmitting }

undo channel-switch mode

Parameters

Parameter	Description	Value
stop-transmitting	Stops data transmission from STAs on the current channel during channel switching.	-
continue-transmitting	Continues data transmission from STAs on the current channel during channel switching.	-

Views

2G radio profile view, 5G radio profile view

Default Level

2: Configuration level

Usage Guidelines

During channel switching, STA communication is interrupted. The administrator can stop an associated STA sending data on the current channel until channel switching is complete. Alternatively, data transmission from STAs can be continued on the current channel before channel switching is complete.

Example

# Stop data transmission from STAs on the current channel during channel switching.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] radio-2g-profile name default
[HUAWEI-wlan-radio-2g-prof-default] channel-switch mode stop-transmitting