clear alarm manual-clear

Function

The clear alarm manual-clear command clears the active alarms that are not reported repeatedly so that these active alarms can be reported again.

Format

clear alarm manual-clear { all | sequence-number sequence-number }

Parameters

Parameter	Description	Value
all	Specifies all the active alarms that are not reported repeatedly.	-
sequence-number sequence-number	Specifies the sequence number of the active alarm that is not reported repeatedly. You can run display alarm manual-clear get the sequence number of the active alarm.	The value is an integer that ranges from 1 to 2147483647.

Views

Alarm management view

Default Level

3: Management level

Usage Guidelines

After the mask manual-clear alarm command is executed to prevent manually cleared active alarms from being reported repeatedly and then the clear alarm active command or MIB table hwAlarmActiveTable is used to manually clear active alarms, active alarms will not be reported repeatedly. To view the active alarms that are not reported repeatedly, run the clear alarm manual-clear command.

To ensure that the active alarms that are not reported repeatedly can be reported again, run the clear alarm manual-clear command. After the clear alarm manual-clear command is executed, running the display alarm manual-clear command does not display corresponding alarm information.

Example

# Clear the active alarms that are not reported repeatedly.

<HUAWEI> system-view
[HUAWEI] alarm
[HUAWEI-alarm] clear alarm manual-clear all