clear mgr inactive-configuration slot

Function

The clear mgr inactive-configuration slot command deletes the inactive Ethernet OAM configurations from the switch that does not register.

Format

clear mgr inactive-configuration slot slot-id [ card card-id ]

Parameters

Parameter	Description	Value
slot slot-id	Specifies the slot ID of a switch that does not register.	The value is an integer and the value range depends on device model.
card card-id	Specifies the offline card ID.	The value is an integer and the value range depends on device model.

Views

System view

Default Level

2: Configuration level

Usage Guidelines

After a subcard has been replaced, using the clear mgr inactive-configuration slot command deletes the configurations of the subcard that does not register if these configurations do not need to be saved.

Running the clear mgr inactive-configuration slot command can delete the inactive configurations.

Before using this command, note the following points:

When the device is in the CSS, ensure that the specified card on which configurations are to be deleted does not register.
Ensure that the specified subcard on which configurations are to be deleted does not register.

Example

# Delete the configurations of the card that does not register in slot 1.

<HUAWEI> system-view
[HUAWEI] clear mgr inactive-configuration slot 1
Warning: The inactive oam-mgr configuration related to the interfaces of the slot or card will be deleted and cannot be restored, continue? [Y/N]:y             
Info: Operation succeeded.