client aging-time

Function

The client aging-time command ages the lost state clients in the client database and specifies the aging time.

The undo client aging-time command cancels the configuration.

By default, the lost state clients in the client database are not aged.

Format

client aging-time aging-time

undo client aging-time [ aging-time ]

Parameters

Parameter	Description	Value
aging-time	Specifies the aging time for clients in the lost state.	The value is an integer that ranges from 72 to 720, in hours.

Views

Easy-Operation view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

Information about clients configured by the network administrator or automatically learned is saved in the client database. The Commander considers that a client to be in the lost state if the client does not respond after two minutes.

The maximum number of clients managed by the Commander depends on the device specifications. If the number of clients exceeds the upper limit, new client information cannot be configured on the Commander. To prevent clients in the lost state from occupying the database resources for a long time, enable the function of aging lost state clients. When the aging time expires, lost state clients are deleted. If some clients in the lost state occupy the database resources for a long time, run the reset easy-operation client-offline command to delete these clients.

Precautions

Automatically learned clients are deleted after their aging time expires.
Manually configured clients are not deleted but their status changes to unknown.

Example

# Enable the function of aging lost state clients and set the aging time to 72 hours.

<HUAWEI> system-view
[HUAWEI] easy-operation
[HUAWEI-easyoperation] client aging-time 72