The clock source ptp synchronization enable command enables clock synchronization of a PTP clock source.
The undo clock source ptp synchronization enable command disables clock synchronization from a PTP clock source.
By default, clock synchronization is not enabled for a PTP clock source.
clock source ptp synchronization enable slot slot-id
undo clock source ptp synchronization enable slot slot-id
| Parameter | Description | Value |
|---|---|---|
| slot slot-id | Specifies a slot ID. | The value depends on the device configuration. |
To enable clock synchronization for a PTP clock source, run the clock source ptp synchronization enable command. If a PTP clock source with clock synchronization enabled is selected as the clock source, frequency is transmitted through PTP messages.
An interface can participate in clock source selection after it is enabled with clock synchronization using the clock synchronization enable command.