cluster enable

Function

The cluster enable command enables the cluster function.

The undo cluster enable command disables the cluster function.

The cluster disable command disables the cluster function.

By default, the cluster function is enabled.

Format

cluster enable

undo cluster enable

cluster disable

Parameters

None

Views

System view

Default Level

2: Configuration level

Usage Guidelines

Before configuring the Commander as the network topology collection device, you need to configure a cluster management VLAN in the cluster view on the Commander so that the Commander only collects topology information of clients in the VLAN. Before configuring a cluster management VLAN on an S series switch, you must run the cluster enable command to enable the cluster function so that you can enter the cluster view.

Example

# Enable the cluster function on a device.

<HUAWEI> system-view

[HUAWEI] cluster enable