cmd recording-scheme

Function

The cmd recording-scheme command applies a policy in a recording scheme to record the commands executed on the device.

The undo cmd recording-scheme command deletes a policy from a recording scheme.

By default, the commands that are used on the device are not recorded.

Format

cmd recording-scheme recording-scheme-name

undo cmd recording-scheme

Parameters

Parameter	Description	Value
recording-scheme-name	Specifies the name of a recording scheme.	The recording scheme must already exist.

Views

AAA view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

During the device configuration, incorrect operations may result in network faults. After the cmd recording-scheme command is executed, you can view records of the commands executed on the device to locate the network faults.

Prerequisites

A recording scheme has been created by using the recording-scheme command and a recording mode has been configured by using the recording-mode hwtacacs command.

Example

# Configure a policy in the recording scheme scheme0 to record the commands executed on the device.

<HUAWEI> system-view
[HUAWEI] hwtacacs-server template hw1
[HUAWEI-hwtacacs-hw1] quit
[HUAWEI] aaa
[HUAWEI-aaa] recording-scheme scheme0
[HUAWEI-aaa-recording-scheme0] recording-mode hwtacacs hw1
[HUAWEI-aaa-recording-scheme0] quit
[HUAWEI-aaa] cmd recording-scheme scheme0