cmp-request entity

Function

The cmp-request entity command sets the entity name used to apply for certificate through CMPv2.

The undo cmp-request entity command deletes the entity name used to apply for certificate through CMPv2.

By default, the entity name used to apply for certificate through CMPv2 is not configured.

Format

cmp-request entity entity-name

undo cmp-request entity

Parameters

Parameter	Description	Value
entity-name	Specifies the entity name for certificate application through CMPv2.	The value must be an existing PKI entity name.

Views

CMP session view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

To apply for a certificate through CMPv2, create a CMP session and specify the entity name in the CMP session.

Prerequisites

A PKI entity has been created using the pki entity command.
A PKI entity common name has been created using the common-name command.

Precautions

The specified entity can be referenced only by one CMP session or PKI realm.

Example

# Set the entity name the device uses when applying for a certificate through CMPv2 to entity1.

<HUAWEI> system-view
[HUAWEI] pki entity entity1
[HUAWEI-pki-entity-entity1] common-name huawei
[HUAWEI-pki-entity-entity1] quit
[HUAWEI] pki cmp session test
[HUAWEI-pki-cmp-session-test] cmp-request entity entity1