command-privilege level rearrange

Usage Scenario

Each command registered on a device is assigned a default level 0, 1, 2, or 3. These levels correspond to the visit level, monitoring level, configuration level, and management level. You can run the command-privilege level rearrange command to upgrade all the level-2 and level-3 commands to level-10 and level-15 commands in batches. The level-0 and level-1 commands remain unchanged.

Precautions

• You can change the levels of the commands that are not separately changed by the command-privilege level command. The levels of the commands that are separately changed by the command-privilege level command cannot be upgraded.

• You can restore the levels of the commands that are upgraded in batches. The levels of the commands that are separately changed by the command-privilege level command cannot be upgraded.
• After the command-privilege level rearrange command is run, users at Level 2 to Level 9 are not allowed to run commands defaulted to Level 2, and users at Level 3 to Level 14 are not allowed to run commands defaulted to Level 3. If some users are required to have the same command privilege as that before the command level promotion, you are advised to adjust the levels of all users on the device.
• After the undo command-privilege level rearrange command is run, users at level 3 to level 14 are allowed to run commands defaulted to level 3, and users at level 2 to level 9 are allowed to run commands defaulted to level 2. If some users are required to have the same command privilege as that before the command level decrease, you are advised to adjust the levels of all users on the device.
• You can use the command-privilege level rearrange command only when your user level is 15.
• After the levels of the commands are upgraded in batches and before the levels of the commands are restored, upgrading the levels of the commands is invalid and does not change the current status of the commands.