confirm

Function

The confirm command confirms that unauthenticated ASs pass the authentication.

This command can only be executed on a parent switch.

Format

confirm { all | mac-address mac-address }

Parameters

Parameter	Description	Value
all	Confirms that all ASs pass the authentication.	-
mac-address mac-address	Confirms that an AS with a specified MAC address passes the authentication.	The value is in H-H-H format, where H is a hexadecimal number of 1 to 4 digits. The value cannot be all 0s, all Fs, or a multicast MAC address.

Views

AS authentication view

Default Level

3: Management level

Usage Guidelines

When an AS needs to be authenticated before connecting to an SVF system, the AS fails the authentication if its MAC address is neither in the whitelist nor in the blacklist. You can run the confirm command to allow all ASs or a specified AS to pass the authentication.

You can run the display as unauthorized record command to check information about the ASs that fail the authentication.

Example

# Confirm that the AS with the MAC address 0025-9e07-8280 passes the authentication.

<HUAWEI> system-view
[HUAWEI] as-auth
[HUAWEI-as-auth] confirm mac-address 0025-9e07-8280