control-down offline delay (authentication access device)

Function

The control-down offline delay command configures the user logout delay on an authentication access device when a control tunnel is faulty.

The undo control-down offline delay command deletes the user logout delay on an authentication access device when a control tunnel is faulty.

By default, the user logout delay is not configured on an authentication access device when a control tunnel is faulty, indicating that the users on an authentication access device go offline immediately when a control tunnel is faulty.

Format

control-down offline delay { delay-value | unlimited }

undo control-down offline delay

Parameters

Parameter	Description	Value
delay-value	Specifies the user logout delay when a control tunnel is faulty.	The value is an integer that ranges from 1 to 60, in seconds.
unlimited	Specifies the user logout delay as unlimited. That is, users do not go offline when a control tunnel is faulty.	-

Views

System view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

You can run the control-down offline delay command to configure the user logout delay on an authentication access device when a control tunnel is faulty. In this way, the users will not directly go offline upon a tunnel fault. If the fault persists after the delay, the users go offline; if the fault is rectified within the delay, the users keep online.

Precautions

This command is supported only on authentication access devices.

You are advised to configure the same user logout delay on authentication control devices and authentication access devices.

Example

# Configure the user logout delay to 10 seconds on an authentication access device after the control tunnel is faulty.

<HUAWEI> system-view
[HUAWEI] control-down offline delay 10