databits

Function

The databits command sets the number of data bits of the user interface.

The undo databits command restores the default number of data bits.

By default, the user interface has 8 data bits.

Format

databits { 5 | 6 | 7 | 8 }

undo databits

Parameters

Parameter	Description	Value
5	Indicates that the number of data bits is 5.	-
6	Indicates that the number of data bits is 6.	-
7	Indicates that the number of data bits is 7.	-
8	Indicates that the number of data bits is 8.	-

Views

User interface view

Default Level

3: Management level

Usage Guidelines

Use this command only when necessary. If the number of data bits of a device's user interface is changed, ensure that the same number of data bits is set on the HyperTerminal used for login.

The setting is valid only when the serial port is configured to work in asynchronous mode.

Example

# Set the number of data bits to 5.

<HUAWEI> system-view

[HUAWEI] user-interface console 0

[HUAWEI-ui-console0] databits 5