Enabling the FTP Server

This section provides a sample of enabling the FTP server using the config method.

**Table 1** Enabling the FTP server
Operation	XPATH
edit-config:config	/huawei-ftp:ftp-server/ipv4-enable /huawei-ftp:ftp-server/ipv6-enable

Data Requirements

**Table 2** Enabling the FTP server
Item	Data	Description
Whether the FTP server is enabled	true	Enable the FTP server.

Request Example

<?xml version='1.0' encoding='UTF-8'?> 
<rpc message-id="1" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0"> 
<edit-config>
  <target>
    <running/>
  </target>
<config>
 <huawei-ftp:ftp-server xmlns:huawei-ftp="urn:huawei:params:xml:ns:yang:huawei-ftp"> 
 <huawei-ftp:ipv4-enable>true</huawei-ftp:ipv4-enable> 
 <huawei-ftp:ipv6-enable>true</huawei-ftp:ipv6-enable>
</huawei-ftp:ftp-server>
</config>
</edit-config>
</rpc>

Response Example

Sample of successful response

<?xml version='1.0' encoding='UTF-8'> 
<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="1"> 
  <ok/> 
</rpc-reply>

Sample of failed response

<?xml version='1.0' encoding='UTF-8'?>
<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="2">
  <rpc-error>
    <error-type>application</error-type>
    <error-tag>operation-failed</error-tag>
    <error-severity>error</error-severity>
    <error-message>parse rpc config error.</error-message>
  </rpc-error>
</rpc-reply>