Configuring a MIP

This section provides a sample of configuring a MIP using the edit-config method.

**Table 1** Configuring a MIP
Operation	XPATH
edit-config	/ietf-interfaces/interfaces/interface/name /ietf-interfaces/interfaces/interface/huawei-cfm:cfm/mip-level

Data Requirements

Item	Data	Description
Interface name	GigabitEthernet0/0/1	Manually create a MIP on GigabitEthernet0/0/1.
MIP level	3	Set the MIP level to 3.

Request Example

<?xml version='1.0' encoding='UTF-8'?>
<rpc message-id="1" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
  <edit-config>
    <target>
      <running/>
    </target>
    <config>
      <if:interfaces xmlns:if="urn:ietf:params:xml:ns:yang:ietf-interfaces">
        <if:interface>
          <if:name>GigabitEthernet0/0/1</if:name>
            <huawei-cfm:cfm xmlns:huawei-cfm="urn:huawei:params:xml:ns:yang:huawei-cfm">
                <huawei-cfm:mip-level>3</huawei-cfm:mip-level>       
            </huawei-cfm:cfm>
        </if:interface>
      </if:interfaces>
    </config>
  </edit-config>
</rpc>

Response example

Sample of successful response

<?xml version='1.0' encoding='UTF-8'?>
<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="1">
  <ok/>
</rpc-reply>

Sample of failed response

<?xml version='1.0' encoding='UTF-8'?>
<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="1">
  <rpc-error>
    <error-type>application</error-type>
    <error-tag>operation-failed</error-tag>
    <error-severity>error</error-severity>
    <error-message>parse rpc config error.</error-message>
  </rpc-error>
</rpc-reply>